.50 cal muzzleloader bullet mold. - Blackpowder Metallic cartridges - Metallic cartridge reloading

The Handloaders Bench > Metallic cartridge reloading > Blackpowder Metallic cartridges > .50 cal muzzleloader bullet mold.

Attention: Due to an increase in spammers all new members start out as probationary members. You will only be able to start a welcome post in the welcome new members forum. You can reply to all other posts. Once you have reached 5 posts you will be a full member and can start topics. We apologize for the inconvenience but spammers are becoming a real problem. We are also experiencing problems with new members receiving activation emails. We are manually activating new members. Please be patient with us. We will activate your membership within 24 hours of registration. People planning to register for membership with The Handloaders Bench. We had to block gmail addresses from registering here for our member’s security and protection, because spam bots have been using gmail a lot to cause problems. You can use a free hotmail or yahoo address to register and receive the activation email. After your membership has been activated, you will be able to change your email back to your gmail address in your account under the menu button at the top of the forum. We are sorry for any inconvenience this might cause. HB Admin

.50 cal muzzleloader bullet mold.

Moderated by: Blkpwdernut

New Topic

Printer Friendly

Rate Topic

Author	Post

Posted: Tue Feb 10th, 2009 12:34 AM

Quote

1^st Post

cb7654
HB Full Member

Joined:	Sun Feb 8th, 2009
Location:	Magnolia, Texas USA
Posts:	13
Photo:
Are you a handloader?:	--
Favorite type of cartridge to load?:	none
My favorite chambering is::
Status:	Offline

anybody know were I can purchase a .50cal hollow point ( muzzleloader) bullet mold? I have a friend hwo is looking for one. He said he has looked everywere and can not find one.

Posted: Tue Feb 10th, 2009 04:46 AM

Quote

2^nd Post

Slingshot
Administrator

Joined:	Mon May 19th, 2008
Location:	Western Burbs , Illinois USA
Posts:	840
Photo:	[Download]
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	rifle
My favorite chambering is::	303 British ...
Status:	Offline

http://www.midwayusa.com/ or http://www.grafs.com/
Pretty much anything for reloading or casting its there.

Slingshot

Last edited on Tue Feb 10th, 2009 04:49 AM by Slingshot

____________________
‘For those who fight for it, life has a  flavor the sheltered will never know.’ - Quote from the movie Sucker Punch.

National Rifle Association Member
Illinois State Rifle Association Member
Elgin Illinois Masonic Lodge 117 A.F. & A.M.

Posted: Tue Feb 10th, 2009 05:13 AM

Quote

3^rd Post

cb7654
HB Full Member

Joined:	Sun Feb 8th, 2009
Location:	Magnolia, Texas USA
Posts:	13
Photo:
Are you a handloader?:	--
Favorite type of cartridge to load?:	none
My favorite chambering is::
Status:	Offline

checked both web sites as well as many others and can't find any

Posted: Tue Feb 10th, 2009 05:24 AM

Quote

4^th Post

Slingshot
Administrator

Joined:	Mon May 19th, 2008
Location:	Western Burbs , Illinois USA
Posts:	840
Photo:	[Download]
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	rifle
My favorite chambering is::	303 British ...
Status:	Offline

http://www.grafs.com/product/212086

http://www.grafs.com/product/212087

http://www.grafs.com/product/212137

http://www.midwayusa.com/viewProduct/?productNumber=515625

http://www.midwayusa.com/viewProduct/?productNumber=559933

http://www.grafs.com/product/214368

http://www.grafs.com/product/218231

Try the links above

Slingshot

Last edited on Tue Feb 10th, 2009 05:26 AM by Slingshot

Posted: Tue Feb 10th, 2009 11:48 PM

Quote

5^th Post

cb7654
HB Full Member

Joined:	Sun Feb 8th, 2009
Location:	Magnolia, Texas USA
Posts:	13
Photo:
Are you a handloader?:	--
Favorite type of cartridge to load?:	none
My favorite chambering is::
Status:	Offline

any more sugestions? I tried all those links with no results, they all have 50 cal molds

but no HOLLOW POINT MOLDS.

Posted: Wed Feb 11th, 2009 12:08 AM

Quote

6^th Post

Dirtkicker
Administrator

Joined:	Mon Sep 3rd, 2007
Location:	High Plains
Posts:	1535
Photo:
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	I load everything!
My favorite chambering is::	.38/.357
Status:	Offline

Got a good, depth-adjustable drill press?

Posted: Wed Feb 11th, 2009 02:07 AM

Quote

7^th Post

Dirtkicker
Administrator

Joined:	Mon Sep 3rd, 2007
Location:	High Plains
Posts:	1535
Photo:
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	I load everything!
My favorite chambering is::	.38/.357
Status:	Offline

On second thought, and just for curiosity, why do you think you need a hollow-point .50 bullet?

Posted: Wed Feb 11th, 2009 05:51 PM

Quote

8^th Post

jbw
HB Full Member

Joined:	Tue Feb 10th, 2009
Location:
Posts:	5
Photo:
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	pistol
My favorite chambering is::
Status:	Offline

Last edited on Wed Feb 11th, 2009 05:52 PM by jbw

Posted: Wed Feb 18th, 2009 05:00 AM

Quote

9^th Post

miestro_jerry
Guest

Joined:
Location:
Posts:
Photo:
Are you a handloader?:
Favorite type of cartridge to load?:
My favorite chambering is::
Status:	Offline

I get Sabot with .44 or .452 caliber hollow points in my 50 cal front stuffer. Lyman and Lee both make hollow point molds. Probably other companies do too. Plus out at the Silhouette Club in L.A. Is a listing for a guy who can hollow point an appropriate mold.

http://www.hollowpointmold.com

Jerry

Current time is 11:59 AM

The Handloaders Bench > Metallic cartridge reloading > Blackpowder Metallic cartridges > .50 cal muzzleloader bullet mold.

Top