The Handloaders Bench Home
Home Search search Menu menu Not logged in - Login | Register
The Handloaders Bench > Metallic cartridge reloading > The tools of the trade > Recomend Good Bullet Puller?

Recomend Good Bullet Puller?
 Moderated by: woodsman777, klallen Page:  First Page Previous Page  1  2   
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Mon Apr 28th, 2008 02:54 AM
   PM  Quote  Reply 
21st Post
sniper-66
HB Pro Staff


Joined: Tue Nov 6th, 2007
Location: Topeka, Kansas USA
Posts: 89
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: 
Status: 
Offline

  back to top

The trick to pulling milsurp bullets with sealant is to run the collet down to within a few thousands from the case neck and tighten.  Then instead of pulling on the bullet, push it down until the collet makes contact with the case neck.  It is easier pushing down on the ram handle and it can't go any further than the case neck.  This breaks the sealant and you can hear it pop loose, then pull up on the handle and pull the bullet out easily.  By doing it this way, you don't run the chance of the collet slipping off the bullet and deforming it. Works like a champ.


 Current time is 05:29 PMPage:  First Page Previous Page  1  2   
The Handloaders Bench > Metallic cartridge reloading > The tools of the trade > Recomend Good Bullet Puller?
 Top

UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1699 seconds (34% database + 66% PHP). 26 queries executed.