Any one use Redding Type S Match Bushing dies - The tools of the trade - Metallic cartridge reloading

The Handloaders Bench > Metallic cartridge reloading > The tools of the trade > Any one use Redding Type S Match Bushing dies

Attention: Due to an increase in spammers all new members start out as probationary members. You will only be able to start a welcome post in the welcome new members forum. You can reply to all other posts. Once you have reached 5 posts you will be a full member and can start topics. We apologize for the inconvenience but spammers are becoming a real problem. We are also experiencing problems with new members receiving activation emails. We are manually activating new members. Please be patient with us. We will activate your membership within 24 hours of registration. People planning to register for membership with The Handloaders Bench. We had to block gmail addresses from registering here for our member’s security and protection, because spam bots have been using gmail a lot to cause problems. You can use a free hotmail or yahoo address to register and receive the activation email. After your membership has been activated, you will be able to change your email back to your gmail address in your account under the menu button at the top of the forum. We are sorry for any inconvenience this might cause. HB Admin

Any one use Redding Type S Match Bushing dies

Moderated by: woodsman777, klallen

New Topic

Printer Friendly

Rate Topic

Author	Post

Posted: Sat May 30th, 2009 02:59 AM

Quote

1^st Post

jwisecarver
HB Full Member

Joined:	Sat Mar 21st, 2009
Location:
Posts:	18
Photo:
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	I load everything!
My favorite chambering is::
Status:	Offline

I am thinking about purchasing a set for my 204 ruger, any input greatly appreciated.

Posted: Sun Jun 28th, 2009 04:41 PM

Quote

2^nd Post

Archangel76
HB Full Member

Joined:	Fri Jun 12th, 2009
Location:
Posts:	7
Photo:	[Download]
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	I load everything!
My favorite chambering is::	7mm/08
Status:	Offline

I've used them in the past on rifles with custom chambers and for that they are well worth the money. For factory chambers however, I think you'd be well-served with a good quality FL die-spend your money on the Competition Seating Die with micrometer top.

Last edited on Sun Jun 28th, 2009 04:42 PM by Archangel76

Posted: Tue Aug 25th, 2009 04:11 AM

Quote

3^rd Post

Enios
HB Pro Staff

Joined:	Wed Jan 23rd, 2008
Location:	Ft Payne, Alabama USA
Posts:	29
Photo:	[Download]
Are you a handloader?:	Yes
Favorite type of cartridge to load?:	I load everything!
My favorite chambering is::	Accurate
Status:	Offline

Got a set for everything I load just for the accuracy. If I didn't want the bushings I'd go for the Forster comp FL, best fl die I've used without a bushing. Runout much better than anything else I've tried without a bushing. I have the Redding and Forster Micro seaters, save some money and get the Forster, only thing I like better on the Redding is it's easier to see the numbers but I set the OAL on my rounds at the ogave and dial it in pretty much without ever looking at the numbers anyway.

Sorry to little to late! Didn't notice hold old this post was!

Last edited on Tue Aug 25th, 2009 04:12 AM by Enios

____________________
Aim small to shoot small!

Current time is 09:59 AM

The Handloaders Bench > Metallic cartridge reloading > The tools of the trade > Any one use Redding Type S Match Bushing dies

Top