The Handloaders Bench Home

Search
   
Members

Calendar

Help

Home
Search by username
Not logged in - Login | Register 
The Handloaders Bench > Rifles > Rifles > My Savage project


My Savage project
 Moderated by: WildBill  

New Topic

Reply

Print
AuthorPost
giturgun
HB Full Member
 

Joined: 19 May 2008
Location: Kingsport, Tennessee USA
Posts: 12
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
Status:  Offline
 Posted: 22 July 2008 02:23 AM

Quote

Reply
 

http://s148.photobucket.com/albums/s14/giturgun/?action=view&current=9499c707.pbw

This is a link to more of this

This is the link to stuff like this  

 

http://s148.photobucket.com/albums/s14/giturgun/?start=0



____________________
Life is short reload all the bullets you can afford.
sdb777
Administrator


Joined: 16 October 2005
Location: Cabot, Arkansas USA
Posts: 1264
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
Status:  Offline
 Posted: 22 July 2008 02:40 AM

Quote

Reply
What's the maker of the stock?  I like it!  Need specs!  Need lots of specs!!

 

 

Scott (quite holding out on us) B



____________________
Archery Tech at a BIG BOX store....
I know where the bathroom is...please ask me!
giturgun
HB Full Member
 

Joined: 19 May 2008
Location: Kingsport, Tennessee USA
Posts: 12
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
Status:  Offline
 Posted: 22 July 2008 03:13 AM

Quote

Reply
Rifle started out as a 112 long action in 25-06. It is the factory laminated stock that I built and painted about a year ago. More info can be found on Savage shooters by doing a search on KaMillion Sniper. Or giturgun and show posts.

 

 The stock is painted with Kamillion multi color paint and also has some Mirical color shift in it. With many coats of clear and hours of drying time in the bathroom in front of a portable heater.

 

  Sadly the rear piller broke out of this stock and it is just sitting in need of repair at the moment. I also have the front adjustable rest color matched to the stock.

The rifle wears a Pac- Nor 1/9 twist 28 inch barrel with no taper , it is double threaded in length for possible future rechambering. Has an 11 degree target crown and also is a tight .250 neck with the throat about .250 in length.

The scope in the pic. is a 8-32 Tasco . It has been replaced with a Burris signature in 8- 32 , the tasco is used when the 222 barrel is on the rifle. I have a 221 fireball barrel . .222 ( rechamber from 223 factory tube . 25-06 heavy varmint 30-06 sporter, and the 22-250 , all have their own scope sighted in mounted on Burris signature rings and can be changed out from one cal to another in about 15 minutes. This includes the barrel , headspaced with the scope taken off and changed out for the one sited in for each barrel. Then all left to do is bore site , move the crosshair to the target , double check and shoot . Set the cross hair on the aim point and adjust to the strike on the target. Can usually completely rebarrel adjust the scope and hit eggs at 200 yards in about 25 min. and no more than 3 spotters on paper.



____________________
Life is short reload all the bullets you can afford.

 Current time is 04:03 PM




Powered by WowBB 1.7 - Copyright © 2003-2006 Aycan Gulez