The Handloaders Bench Home
Home Search search Menu menu Not logged in - Login | Register
The Handloaders Bench > Metallic cartridge reloading > Primers, powders, bullets and brass > Penetration Test

Attention: Due to an increase in spammers all new members start out as probationary members. You will only be able to start a welcome post in the welcome new members forum. You can reply to all other posts. Once you have reached 5 posts you will be a full member and can start topics. We apologize for the inconvenience but spammers are becoming a real problem. We are also experiencing problems with new members receiving activation emails. We are manually activating new members. Please be patient with us. We will activate your membership within 24 hours of registration. People planning to register for membership with The Handloaders Bench. We had to block gmail addresses from registering here for our member’s security and protection, because spam bots have been using gmail a lot to cause problems. You can use a free hotmail or yahoo address to register and receive the activation email. After your membership has been activated, you will be able to change your email back to your gmail address in your account under the menu button at the top of the forum. We are sorry for any inconvenience this might cause. HB Admin

Penetration Test
 Moderated by: klallen, fryboy
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Wed Apr 20th, 2005 08:50 PM
   PM  Quote  Reply 
1st Post
billt
Guest
 

Joined: 
Location:  
Posts: 
Photo: 
Are you a handloader?: 
Favorite type of cartridge to load?: 
My favorite chambering is:: 
Status: 
Offline

  back to top

I posted this on another forum a while back. I came across this steel block while I was cleaning out, and organizing my gun room a while ago. The large hole that almost made it thru the block was a .30 Cal. Carbide Core AP bullet pulled from a .30-06 and handloaded in my .300 Weatherby Magnum. You can see in the photo of the back of the block that it almost made it completly thru. The slug bounced back and was found about 15 feet in front of the block. The shot was from about 50 yards. You can see in the photo the copper jacket was almost completly shed, but the Carbide Core remained intact. The large craters were made by M-193 Ball Ammo in 5.56 NATO fired from a AR-15. The very small dimples that are barely visible were full house 240 Gr. .44 Magnum JSP rounds fired from my Ruger Super Redhawk. The material was 4140 Pre Hard. About 38 to 40 Rockwell C.   billt


 Posted: Thu Apr 21st, 2005 03:47 PM
   PM  Quote  Reply 
2nd Post
Gunrunner
Super Moderator


Joined: Thu Feb 3rd, 2005
Location: Burkina Faso
Posts: 1470
Photo: [Download]
Are you a handloader?: Yes
Favorite type of cartridge to load?: I shoot factory ammo
My favorite chambering is:: Whatever I'm shooting that day
Status: 
Offline

  back to top

I've done stuff like that too Billt.   A friend gave me some 7/16" thick steel I-beam sections.   44 Mag just bounced off it.  Regular 223 fmj would make a crater.  SS109 would usually penetrate.   I still have the lead core and steel insert from one of the rounds that made it through.   It's a lot of fun trying different types of ammo on steel, wood, etc...    :thumbs:

 



____________________
"Get off your computer and go load some ammo"

Welcome to California. Press 2 for English.


 Current time is 06:52 PM
The Handloaders Bench > Metallic cartridge reloading > Primers, powders, bullets and brass > Penetration Test
 Top

UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1426 seconds (17% database + 83% PHP). 28 queries executed.