The Handloaders Bench Home
Home Search search Menu menu Not logged in - Login | Register
The Handloaders Bench > Rifles > Battle rifles > Remington U.S. M 1903

Attention: Due to an increase in spammers all new members start out as probationary members. You will only be able to start a welcome post in the welcome new members forum. You can reply to all other posts. Once you have reached 5 posts you will be a full member and can start topics. We apologize for the inconvenience but spammers are becoming a real problem. We are also experiencing problems with new members receiving activation emails. We are manually activating new members. Please be patient with us. We will activate your membership within 24 hours of registration. People planning to register for membership with The Handloaders Bench. We had to block gmail addresses from registering here for our member’s security and protection, because spam bots have been using gmail a lot to cause problems. You can use a free hotmail or yahoo address to register and receive the activation email. After your membership has been activated, you will be able to change your email back to your gmail address in your account under the menu button at the top of the forum. We are sorry for any inconvenience this might cause. HB Admin

Remington U.S. M 1903
 Moderated by: The_Mountaineer, DesertMarine, Aussie Mick
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Thu Oct 22nd, 2009 07:51 PM
   PM  Quote  Reply 
1st Post
malingering marv
HB Full Member
 

Joined: Tue Oct 20th, 2009
Location:  
Posts: 8
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: americac's cartridge, '06 springfield
Status: 
Offline

  back to top

  Does anyone have any suggestions on a company that rebuilds Springfields?

My uncle gave one when I was ten years old.  It obviously was fired with corrosive primers and not cleaned properly but now that I am the age he was when he passed away I'd like to get it rebuilt.                                                       

                                                                                  Malingering Marv



 Posted: Thu Oct 22nd, 2009 11:39 PM
   PM  Quote  Reply 
2nd Post
-6
Super Moderator


Joined: Sat Jun 28th, 2008
Location: South Central, North Carolina USA
Posts: 2558
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: '06
Status: 
Online

  back to top

Killed deer and played with a sporterized '03 for nearly twenty yrs. Replaced it with a Ruger 77 composite stainless in '06--naturally. Love the smoothness and toughness of the action. Hope to rebarrel it "one of these days". wc



____________________
Lk 23-if you don't have a sword then sell your cloak and buy one.
Peace is that glorious moment in history
when everyone stands around -- reloading.


 Posted: Fri Oct 23rd, 2009 12:11 AM
   PM  Quote  Reply 
3rd Post
ghrit
Moderator


Joined: Fri Apr 14th, 2006
Location: Endless Mountains, Pennsylvania USA
Posts: 1554
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: none
My favorite chambering is:: 2-3/4 dram equiv, 1 OZ, 7-1/2 trap
Status: 
Offline

  back to top

There are any number of gunsmiths that can re-barrel it (and a few that can do a bang up restoration to "correct" standards at a bang up price) for you, and it won't take a lot of searching to find one, quite possibly in your area. Bear in mind that any collector value it has will be utterly destroyed if all you do is re-barrel. Were it me, I'd shoot it as is, or "hang it on the wall" and enjoy the pride of owning an old war dog that came thru from family.



____________________
-Remote locations are cheap insurance.
-There are two kinds of ships: Submarines and targets


 Posted: Fri Oct 23rd, 2009 04:32 AM
   PM  Quote  Reply 
4th Post
Charley
Board Founder


Joined: Fri Sep 9th, 2005
Location: San Antonio, Texas USA
Posts: 6136
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: all of them
Status: 
Offline

  back to top

I looked at this post earler, and wasn't sure how to answer it. Given it some thought, now.

If you are looking to rebarrel, decent smiths are pretty common. If you are looking to restore, you are looking at a pretty good chuck of cash.

What kind of shape is it in? Can you post pictures? I play with milsurps regularly, and I've seen some bores that looked pretty bad at first (and second!) glance, but cleaned up to shooter status with time and labor. Do you need stock work done? Finish?

You might be able to clean it up yourself, with some guidance. As much as I hate sending someone to another board, http://www.gunboards.com/ can give you some excellent information on your warhorse.

Good luck with your rifle, a legacy gun from a family member is always special. I'd like to see what you do with it.



____________________
STOP OBAMUNISM NOW!


 Posted: Fri Oct 23rd, 2009 09:04 AM
   PM  Quote  Reply 
5th Post
-6
Super Moderator


Joined: Sat Jun 28th, 2008
Location: South Central, North Carolina USA
Posts: 2558
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: '06
Status: 
Online

  back to top

Hi Charlie, Have had it parked in the safe for 3-4 years. Just oiled it down good and said bye for now. When in the Marines I fired comp. a bit and just could not stand the eight inch group at 100 yds. Will take your advice and give the bore a thorough cleaning and try it again. It is a sweet operating shooter. Was shooting at multiple deer late and my son thought I was using an auto loader. Will try to post pics later. Thanks again for the encouragement. LOL, my wife says I need lots of prodding because of my procrastinator mentality-- she may have something there, wc



____________________
Lk 23-if you don't have a sword then sell your cloak and buy one.
Peace is that glorious moment in history
when everyone stands around -- reloading.


 Posted: Fri Oct 23rd, 2009 03:01 PM
   PM  Quote  Reply 
6th Post
3006 user
Gold Sponsor


Joined: Mon Jul 30th, 2007
Location: Denver Area, Colorado USA
Posts: 1498
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: 30-06
Status: 
Offline

  back to top

-6 wrote: Hi Charlie, Have had it parked in the safe for 3-4 years. Just oiled it down good and said bye for now. When in the Marines I fired comp. a bit and just could not stand the eight inch group at 100 yds. Will take your advice and give the bore a thorough cleaning and try it again. It is a sweet operating shooter. Was shooting at multiple deer late and my son thought I was using an auto loader. Will try to post pics later. Thanks again for the encouragement. LOL, my wife says I need lots of prodding because of my procrastinator mentality-- she may have something there, wc

Sort of on topic - When my wife used to accuse me of being a procrastinatior, my reply was "If it weren't for procrastination, I wouldn't get anything done".   With a smile, of course!:thumbs:



____________________
Molon Labe
Patron member NRA
USN 1956-1961


 Posted: Sat Oct 24th, 2009 12:07 AM
   PM  Quote  Reply 
7th Post
-6
Super Moderator


Joined: Sat Jun 28th, 2008
Location: South Central, North Carolina USA
Posts: 2558
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: '06
Status: 
Online

  back to top

LOL, a smile gets one out of lots of trouble with "moma"---most of the time. wc



____________________
Lk 23-if you don't have a sword then sell your cloak and buy one.
Peace is that glorious moment in history
when everyone stands around -- reloading.


 Current time is 12:38 AM
The Handloaders Bench > Rifles > Battle rifles > Remington U.S. M 1903
Top




UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.2310 seconds (25% database + 75% PHP). 27 queries executed.