The Handloaders Bench Home
Home Search search Menu menu Not logged in - Login | Register
The Handloaders Bench > Metallic cartridge reloading > Handloaders Bench.Com load data > HELP!! s&w 500 hand loads with cast 500 grain and AA no9 ?

HELP!! s&w 500 hand loads with cast 500 grain and AA no9 ?
 Moderated by: Timberghozt
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Tue Nov 3rd, 2009 03:04 PM
   PM  Quote  Reply 
1st Post
9secondsflat
member
 

Joined: Mon Oct 12th, 2009
Location:  
Posts: 27
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: rifle
My favorite chambering is:: 308 ...
Status: 
Offline

  back to top

i purchased 500 grain from leadhead and have AA no9 but cant find any load data can someone help? thanks in advance 



 Posted: Tue Nov 3rd, 2009 11:17 PM
   PM  Quote  Reply 
2nd Post
wheezengeezer
Moderator


Joined: Mon Jul 16th, 2007
Location: Jeddediah Jones Swamp,Corbin, Kansas USA
Posts: 1125
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: pistol
My favorite chambering is:: 44 Marlin 1.28 straight
Status: 
Offline

  back to top

AA9 wont get you the top velocities but should get you to the mid range easily.Being a double base ball dont use it for light loads.I think 16 grains should get close to 1200 fps and  40 thou psi.Anyone else?

Last edited on Tue Nov 3rd, 2009 11:18 PM by wheezengeezer



____________________
I was raised in the 50's on gunpowder and jackrabbits.salt and pepper wooda made'em taste better


 Posted: Wed Nov 4th, 2009 12:03 AM
   PM  Quote  Reply 
3rd Post
OldStuffer
member


Joined: Sat Oct 31st, 2009
Location: Newton, Kansas USA
Posts: 234
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: 12-gauge A-5, .308 Winchester BAR, .45acp (in a 1911 of ...
Status: 
Offline

  back to top

I know my Big Red Book is too old for S&W500, so I'm checking the 'net................



 Posted: Wed Nov 4th, 2009 12:12 AM
   PM  Quote  Reply 
4th Post
OldStuffer
member


Joined: Sat Oct 31st, 2009
Location: Newton, Kansas USA
Posts: 234
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: 12-gauge A-5, .308 Winchester BAR, .45acp (in a 1911 of ...
Status: 
Offline

  back to top

Just downloaded their loading manual.

Accurate does not show any loadings for 500S&W with a 500 gr bullet. 325gr to 440 gr, yes, 500, no.

Pwdr / bullet data / start / maximum / max press / OAL
Lead bullet
No. 9 / 440gr CP WFNGC / 27.0 1,325 / 30.5 1,490 / 56,000 / 2.020

Jacketed
No. 9 / 400 SIE JSP / 31.0 1,490 / 4.5 1,670 / 57,500 / 2.060

The best I can do for ya.
4100 gets best velocity.

Too bad you aren't close, I have some 1680 to get rid of. LOL (under a pound).



 Posted: Wed Nov 4th, 2009 12:15 AM
   PM  Quote  Reply 
5th Post
miestro_jerry
Administrator


Joined: Sat Jun 28th, 2008
Location: Somerton - A Terrorist Free Community, Ohio USA
Posts: 3880
Photo: [Download]
Are you a handloader?: Yes
Favorite type of cartridge to load?: I load everything!
My favorite chambering is:: 5.56 NATO
Status: 
Offline

  back to top

This cartridge was designed for an overwhelming fire power roll. The most effective powders are H110/296. With what you have on hand, if the bullets are gas checked, you can start with 25 grains of Number 9 powder and slowly work your way up to maybe 28 grains as your MAX load. But this is not my data, so all disclaimers do apply to this situation.

Jerry



____________________
No Goats, No Glory


NRA Benefactor Member
Ohio Rifle and Pistol Association Member
The Cast Bullet Association
Bethesda Farmers and Sportsmen Club
ODNR Certified and Licensed Hunter


 Posted: Wed Nov 4th, 2009 09:56 AM
   PM  Quote  Reply 
6th Post
9secondsflat
member
 

Joined: Mon Oct 12th, 2009
Location:  
Posts: 27
Photo: 
Are you a handloader?: Yes
Favorite type of cartridge to load?: rifle
My favorite chambering is:: 308 ...
Status: 
Offline

  back to top

thanks..



 Current time is 07:50 AM
The Handloaders Bench > Metallic cartridge reloading > Handloaders Bench.Com load data > HELP!! s&w 500 hand loads with cast 500 grain and AA no9 ?
Top




UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1618 seconds (9% database + 91% PHP). 26 queries executed.